Stainless Steel Threaded Bar
Original price was: £51.05.£30.63Current price is: £30.63.
Mild Steel Angle Galvanised is an angle shaped galvanised Mild Steel.
Hot-dip galvanising is the process of coating iron or steel with a thin zinc layer, by passing the steel through a molten bath of zinc at a temperature of around 860 °F (460 °C). When exposed to the atmosphere, pure zinc reacts with oxygen to form zinc oxide, which further reacts with carbon dioxide to form zinc carbonate, a dull grey, fairly strong material that stops further corrosion in many circumstances, protecting the steel below from the elements.
Galvanised steel is widely used in applications where rust resistance is needed, and can be identified by the crystallization patterning on the surface (often called a “spangle”).
You can call or email our friendly sales team who can look into sourcing this for you 0191 2646464 [email protected]
Stainless Steel Threaded Bar 304/304L is a threaded bar of 304/304L Stainless Steel Alloy.
304/304L Stainless Steel Alloy has excellent mechanical properties and is resistant to many corrosive agents.
It is useful where sanitation and cleanliness are important. Non magnetic in the annealed condition. Hardness and tensile strength can be increased by cold working, but modified by lowered carbon content providing good resistance to corrosion in welded construction where subsequent heat treatment is not practical.
Grade 304L (L= low carbon) is the same as the 304 except it has an extra-low-carbon analysis, the advantage of which is that it precludes any harmful precipitation in the 800º F to 1500º F range, such as might otherwise occur in welding heavier sections.
| Specifications EN 10088-3, 1.4301 |
| Characteristics Cold Working: Good Corrosion Resistance: Excellent Heat Resistance: Good Heat Treatment: Poor Hot Working: Fair Machinability: Good Weldability: Very Good |
| Uses Common uses of Stainless Steel Threaded Bar 304/304L include: Architectural Paneling Bolts Cutlery & Flatware Food & Pharmaceutical Production Equipment Nuts Sanitary Ware & Troughs Saucepans Screws Sinks & Splash Backs Springs |
| More Info Density: 8.00 g/cm³ Electrical Resistivity: 0.72 x10^-6 Ω .m Elongation A50 mm: 45 Min % Hardness Brinell: 215 Max HB Melting Point: 1450 °C Modulus of Elasticity: 193 GPa Proof Stress: 190 Min MPa Tensile Strength: 500 – 700 MPa Thermal Conductivity: 16.2 W/m.K Thermal Expansion: 17.2 x10^-6 /K |
Be the first to review “Stainless Steel Threaded Bar”
Related products
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Accessories
Reviews
There are no reviews yet.